Gomaco 3300 slipform paver
Hvis du beslutter at købe udstyret til en lav pris, skal du sikre, at du kommunikerer med den rette sælger. Find ud af så mange oplysninger som muligt om udstyrets sælger. En måde til at snyde på, er at lade som om, du er en reel virksomhed. Hvis der opstår mistanke, skal du informere os for en yderligere kontrol ved brug af formularen til feedback.
Før du beslutter dig til at købe, skal du undersøge adskillige salgstilbud grundigt for at opnå en forståelse af den gennemsnitlige pris på dit valgte udstyr. Hvis prisen på det tilbud, du kan lide, er meget lavere end lignende tilbud, skal du tænke dig godt om. En betydelig prisforskel er muligvis tegn på skjulte defekter eller et forsøg fra sælgerens side på at svindle eventuelle købere.
Køb ikke produkter med en for lav pris i forhold til den gennemsnitlige pris for lignende udstyr.
Stol ikke på tvivlsomme løfter og forudbetalte varer. Hvis du er i tvivl, skal du ikke være bange for at bede om yderligere oplysninger. Bed om flere fotografier og dokumenter for udstyret. Kontrollér, at dokumenterne er ægte. Stil spørgsmål.
Den mest almindelige form for svindel. Uhæderlige sælgere beder eventuelt om en forskudsbetaling for at "booke" din ret til at købe udstyret. Svindlere kan således indsamle et stort beløb og forsvinde, og ikke længere kontakte dig.
- Overførsel af forudbetalingen til kortet
- Foretag ikke nogen forskudsbetaling uden dokumenter, som bekræfter pengeoverførslen, hvis sælgeren er i tvivl i løbet af forhandlingerne.
- Overførsel til mellemmandens konto
- Du skal være på vagt over for en sådan anmodning, da du højst sandsynligt har at gøre med en svindler.
- Overførsel til en firmakonto med et lignende navn
- Vær opmærksom på, at svindlere muligvis udgiver sig for at være velkendte virksomheder ved at ændre navnet en lille smule. Overfør ikke penge, hvis der er tvivl om firmanavnet.
- Erstatning af egne oplysninger på en faktura fra en reel virksomhed.
- Før du foretager en overførsel, skal du sikre, at de specificerede oplysninger er korrekte, og om de har forbindelse til den specificerede virksomhed.
Sælgerens kontaktoplysninger
+49 4323 8...
Vis
+49 4323 802527
+49 4323 80...
Vis
+49 4323 8025170
+49 172 42...
Vis
+49 172 4222113
+49 179 60...
Vis
+49 179 6069650
Tyskland 
Tyskland
Tyskland
Ukraine, Chernivtsi Ob'izna
USA, Miami
Polen, Warsaw
Storbritannien, Billingham
Nederlandene, Haps
Nederlandene, Asten
Tyskland, Selfkant
Kina, Shanghai
USA, Miami
Portugal
Spanien, Chiva
USA, Miami
USA, Miami
Georgien, Tbilisi
Kina, Shanghai
USA, Miami
USA, Miami
USA, Miami
Year of manufacture: 2019
Serial number: 903100-362
Working hours: ~420 hours
Three-legged machine with a paving width of up to 3.5m full area
Paving in transport position and transverse
Incl. 3 pieces of farm tracks screeds up to 3.5m with vibrators
Engine: C3.4B diesel engine, Caterpillar- 120hp (93.3kW). Tier 4
Fuel tank, capacity: 265 liters
Hydraulic oil tank, capacity: 336.9 liters
Oil cooler
Eight hydraulic circuits
Automatic on/off switch for vibrators
- Synchronized with the machine movement
Hydraulic pump system
Fiberglass engine and control panel enclosure
- Improved visibility of the operator
- Better access to engine, pumps and valves
Operator station for left and right
- designed for easy monitoring of all hydraulic controls and electronic censoring functions as well as remote control of travel speed
G+ control panel and G+ Connect:
GOMACO's proprietary operating system - Handling is very user-friendly and easy to learn
- Self-diagnostic system with 165 mm (6.5 inch) anti-glare color and graphic display
- Pulse sensors in the crawler motors enable precise speed and distance measurement with various attachments.
- Detailed machine history
- 3D concreting systems are recognized immediately, which enables simple interface integration. Installation with 3D operating system is immediately recognized by the G+ system through intelligent interface integration
- Operating software can be operated in several languages
- e.g. English / German
GRD (Gomaco Remote Diagnostic System)
- Enables service personnel to access and check configuration parameters for fault diagnosis
- Remote setting of devices via GPS
- Transmission of GSI real-time data for optimum control of machine performance
- Notifications by e-mail on request
- Software updates
- Two-year license
Three mounted lifting legs
- with 914mm lifting cylinder
- 203mm manual adjustment
- 1,116mm total vertical adjustment
- with 180゜changeable drive
- Electronic rotation sensors for accurate track feedback
Hydraulic rear leg shift
- Power Slide for rear track positioning with intelligent cylinder to assist correct steering angle over the radius
- 1803mm side track movement for optimum machine balance.
Very stable front mold support left and right
frame
- right leg positioning:
- 422mm lateral hydraulic movement from outside to straight ahead
- 914mm lateral movement
- either left or right for kerb and gutter, barrier, slot drain, water channel, sidewalk
Hook & Go pull bar and additional bracket
- 457 mm pressure-compensated hydraulic height adjustment
and 660 mm manual height adjustment
- Total vertical adjustment 1117 mm
- 914 mm maximum hydraulic lateral adjustment
- With smart telescopic mold holder for repeatable mold changes
NOTE: A screed with a width of up to 2.5 m can be mounted on the right or left side of the standard 3300.
Mounted, foldable conveyor belt
- Hydraulically driven
- 5.64m between the central deflection rollers
- 610mm wide, vulcanized conveyor belt
- Variable speed regulation
- Lateral swivel bracket with hydraulic adjustment of the loading height
- hydraulic sideshift for the left or right side
- Hydraulic bracket for the standard auger conveyor
- vulcanized
- Conveyor belt protection
Emergency stop switch
Three crawler tracks - Series 1 with two-stage hydraulic motors
- Hydraulically driven with automatic tensioning
- Length 1.56m
- 300mm wide pads with road plates
- 100:1 reduction ratio
- Pave speed 0 to 15.1 mpm
- additional movement 0-40 mpm
Polyurethane trackpads
- 1 set
Hydraulic rotation drives
- with 180゜changing drive
- with electronic rotation sensors for accurate track feedback
High pressure water system
- Including 416 liter tank, adjustable high-pressure gun
- Pressure regulation from 0 to 140 bar
Lighting system for night operation
- Includes 4 LED lights, 9-32 V DC voltage, incl. attachment
The scope of delivery includes three paving molds:
1. Variable Farmway/ -road mold (year of manufacture: 2021)
Adjustment of track width and gap from outside to inside.
(Permanent total width of the mold: 3868mm; track width from 1000-1300mm;
intermediate track width of 800-1000mm)
- A transverse auger mounted on the hopper and driven by a chain
driven by a chain; drive unit without reduction gear.
- The concrete is fed into the hopper by means of the GT3300 conveyor belt.
- To achieve the different concrete strips with paving width, this requires
manual adjustment of the respective paving/track dimensions.
- Individual manual adjustment of the paving thickness of the tracks from at least
140 mm - 240 mm; stroke adjustment +80 / - 20 mm.
- Shape assembly and suspension in transport position included.
- Hydraulically operated - pressure-compensated side formwork
- 4 VIBRATORS included in the scope of delivery
(Straight design, almost unused/very little used)