Exeron HSC 300/3 bearbejdningscenter

Preis: Contact us for price
high-speed CNC machining center
Type: HSC 300/3
Manufacturer: Exeron
Control: Heidenhain iTNC 640
Spindle hours: 9500
Max spindle speed: 42000 rpm
Max table load: 500 kg
Clamping table size: 400 x 470 mm
HVC140 HSK-E40 milling spindle – S1/S6 40% milling power: 10 kW/13 kW. Ceramic ball bearings with minimal oil and air lubrication
Tool magazine with 16 positions for HSK-E40 tools
with a diameter of up to 16 mm and a maximum length of 75 mm
Blum laser tool measurement
located on the left side
including a tool damage control system
Rotating tools with a diameter of 0.2 to 16 mm are measured directly in the machine working area
The minimum tool length is 45 mm
Graphite extraction system including preparation of the machine for extraction
Air flow rate approx. 1,400 m³/h
noise level approx. 73 dB(A)
Residual dust content in the exhaust air is max. 0.5 mg/m³. This value is approximately 15 times lower than the permissible MAK limit
Sound absorber for the L-CUT system. Reduction of the sound pressure level by approximately 9 dB(A)
Heidenhain remote control for manual operation of the machine
equipped with setting functions
electronic handwheel and activation button
Hydac cooling system for the spindle. Automatic lubrication system. Additional LED lighting of the working area. Oil mist lubrication unit. System language: English
Renishaw OMP400 infrared measuring probe with HSK-E40 holder
Machine in good condition
fully functional
under power
Find more here
vis kontakter
Contact us at
vis kontakter