Ny TyreON T650M 11-26 Inch mobile tire machine for use on the side or rear dækmaskine til lastbiler
Akersloot
Hvis du beslutter at købe udstyret til en lav pris, skal du sikre, at du kommunikerer med den rette sælger. Find ud af så mange oplysninger som muligt om udstyrets sælger. En måde til at snyde på, er at lade som om, du er en reel virksomhed. Hvis der opstår mistanke, skal du informere os for en yderligere kontrol ved brug af formularen til feedback.
Før du beslutter dig til at købe, skal du undersøge adskillige salgstilbud grundigt for at opnå en forståelse af den gennemsnitlige pris på dit valgte udstyr. Hvis prisen på det tilbud, du kan lide, er meget lavere end lignende tilbud, skal du tænke dig godt om. En betydelig prisforskel er muligvis tegn på skjulte defekter eller et forsøg fra sælgerens side på at svindle eventuelle købere.
Køb ikke produkter med en for lav pris i forhold til den gennemsnitlige pris for lignende udstyr.
Stol ikke på tvivlsomme løfter og forudbetalte varer. Hvis du er i tvivl, skal du ikke være bange for at bede om yderligere oplysninger. Bed om flere fotografier og dokumenter for udstyret. Kontrollér, at dokumenterne er ægte. Stil spørgsmål.
Den mest almindelige form for svindel. Uhæderlige sælgere beder eventuelt om en forskudsbetaling for at "booke" din ret til at købe udstyret. Svindlere kan således indsamle et stort beløb og forsvinde, og ikke længere kontakte dig.
- Overførsel af forudbetalingen til kortet
- Foretag ikke nogen forskudsbetaling uden dokumenter, som bekræfter pengeoverførslen, hvis sælgeren er i tvivl i løbet af forhandlingerne.
- Overførsel til mellemmandens konto
- Du skal være på vagt over for en sådan anmodning, da du højst sandsynligt har at gøre med en svindler.
- Overførsel til en firmakonto med et lignende navn
- Vær opmærksom på, at svindlere muligvis udgiver sig for at være velkendte virksomheder ved at ændre navnet en lille smule. Overfør ikke penge, hvis der er tvivl om firmanavnet.
- Erstatning af egne oplysninger på en faktura fra en reel virksomhed.
- Før du foretager en overførsel, skal du sikre, at de specificerede oplysninger er korrekte, og om de har forbindelse til den specificerede virksomhed.
Sælgerens kontaktoplysninger
+31 6 537...
Vis
+31 6 53701658
+31 72 540...
Vis
+31 72 540 1002
Nederlandene 
Nederlandene, Lelystad
Litauen, Vilnius
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Nederlandene, Akersloot
Rims 11 - 26 Inch
Wheels up to 1200 kg - Ø 150 cm - 100 cm ↔
Mounting speed 1-Speed | 8 rpm
Bead breaker force 2500 kg / 24.515 kN
Operation Electric-hydraulic
Gear motor-chuck 1.5 kW
Hydraulic pump 1.1 kW
Model Mobile - to install in van
Height cargo floor About 25 - 75 cm
In wooden box L130 x B81 x H166 cm - 475 kg
Including Wired controller, 230V battery charger and free accessoires
Installation Side or rear of a vehicle
Application Truck tires, super singles, tires agricultural vehicles / construction machinery
Installation Side or rear of a vehicle
Voltage 400V (no compressed air required)
Including Free accessoires
Mobile - to install in van
For tube and tubeless tyres of lorries, earthmoving, excavating and agricultural vehicles. Option on installment in vans.
Ideal for in the field replacement of large and wide tires such as super singles.
The mobile tire machine shifts and folds out through the dooropening and positions itself at street level.
The chuck moves up and down hydraulically.
TyreON T650M mobile tire machine
Fully automatic mobile tire changing machine
This electronic-hydraulic mobile tire machine with hardened steel chuck is operated by a user friendly 24V controller unit.
Covers an area of 136 x 72cm of the cargo area
Suited for backdoor or sidedoor installment in a van
Required door size: 72cm width x 154cm height
Own weight of 450 kg
Portable controller
Easy clamping and lifting of both large and small wheels
Tires up to 100 cm wide
Mounting hook as standard accessory
Also assembly of super singles
Minimum clamping range of 10 cm
Simple DIY installation on the side or the rear
One places the mobile tire machine in the van and fastens it to the cargo floor via the base frame. The maximum height of the cargo floor is 75cm.
For safety of man and machine the T650M mobile tire changing machine is equipped with a locking chain while in transit.
Advantages of the mobile tire machine
Simple installment
Light diesel or gas generator required (400V)
Modest in size and weight
Safe workspace at the rear of service van (rear installaition)
Damage prevention rims
Safe 24V controller with emergency stop, joystick and foot pedal
Can be folded, in the event of a power failure, into the vehicle by manual handpump
Machine operation - mobile tire changing machine
The chuck is vertically movable via the sled (hydraulic).
The chuck can be moved horizontally on the sled (hydraulic)
Four hydraulic powered hardened steel jaws grab and lift the rim
The mounting arm is hydraulically movable (telescopic)
The mounting head can be rotated and locked manually in 3 positions
After the tire change the machine folds itself up fully automatically
Extra safety features - mobile tire machine for trucks
This valve limits the pressure to 130 bar and keeps the hydraulic motions smooth and powerful.
Check valve 1
-
Hydraulic non-return valve in the controller unit of the chuck.
This prevents the wheel from being released and falling in case of hose failure.
Check valve 2
-
Hydraulic non-return valve in the controller unit of the chuck for chuck and arm movement
This part keeps the arm in position in case of hose failure.
Thermal safety
-
Pump engine is equipped with a thermal safety feature.
The engine makes an emergency stop in case of overheating to prevent damage.
TyreON T650M mobile tire machine
Technical details T650M (400V)
For truck tyres with rim size 11 - 26 Inch A
Maximum wheel diameter 150 cm D
Maximum wheel width 100 cm C
Maximum wheel weight 1200 kg
Clamping range (chuck) 10 - 70 cm (27 Inch)
Bead breaker force 2500 kg / 24.515 kN F
Operating pressure - hydraulic 130 Bar
Performance hydraulic pump motor 1.1 kW F
Performance gear motor - electric rotation of the chuck 1.5 kW E
Rotational speeds - rpm (clockwise and counterclockwise) 1 - 8 rpm E
Torque 2200 Nm
Automated movements 10
Voltage of the control unit 24 Volt (DC)
Net weight 450 kg
Noise level 40 - 65 dBA
4 rotating self-centering clamping arms ✓
Connection voltage 400V - 3Ph
Fusing 16A
Required loading floor area (length x width) 136 x 72 cm
Required height 154 cm
Mobile tire machine - delivery includes
The mobile tire machine with wired control unit is tested for all functions and packed in a sturdy box together with
Rim clamp for trucks
Mounting hook (Mounting hook for mounting on the tubeless roller)
2 tire levers
Holder for a grease container and a brush
Installation and operating manual for the mobile tire changing machine
T650M 11-26 Inch mobile tire machine for use on the side or rear of a vehicle - wireless controller with rechargeable battery