Ny Caterpillar CG170-20 2MW gasgenerator
Hörsching7279 km to "United States/Columbus"
Hvis du beslutter at købe udstyret til en lav pris, skal du sikre, at du kommunikerer med den rette sælger. Find ud af så mange oplysninger som muligt om udstyrets sælger. En måde til at snyde på, er at lade som om, du er en reel virksomhed. Hvis der opstår mistanke, skal du informere os for en yderligere kontrol ved brug af formularen til feedback.
Før du beslutter dig til at købe, skal du undersøge adskillige salgstilbud grundigt for at opnå en forståelse af den gennemsnitlige pris på dit valgte udstyr. Hvis prisen på det tilbud, du kan lide, er meget lavere end lignende tilbud, skal du tænke dig godt om. En betydelig prisforskel er muligvis tegn på skjulte defekter eller et forsøg fra sælgerens side på at svindle eventuelle købere.
Køb ikke produkter med en for lav pris i forhold til den gennemsnitlige pris for lignende udstyr.
Stol ikke på tvivlsomme løfter og forudbetalte varer. Hvis du er i tvivl, skal du ikke være bange for at bede om yderligere oplysninger. Bed om flere fotografier og dokumenter for udstyret. Kontrollér, at dokumenterne er ægte. Stil spørgsmål.
Den mest almindelige form for svindel. Uhæderlige sælgere beder eventuelt om en forskudsbetaling for at "booke" din ret til at købe udstyret. Svindlere kan således indsamle et stort beløb og forsvinde, og ikke længere kontakte dig.
- Overførsel af forudbetalingen til kortet
- Foretag ikke nogen forskudsbetaling uden dokumenter, som bekræfter pengeoverførslen, hvis sælgeren er i tvivl i løbet af forhandlingerne.
- Overførsel til mellemmandens konto
- Du skal være på vagt over for en sådan anmodning, da du højst sandsynligt har at gøre med en svindler.
- Overførsel til en firmakonto med et lignende navn
- Vær opmærksom på, at svindlere muligvis udgiver sig for at være velkendte virksomheder ved at ændre navnet en lille smule. Overfør ikke penge, hvis der er tvivl om firmanavnet.
- Erstatning af egne oplysninger på en faktura fra en reel virksomhed.
- Før du foretager en overførsel, skal du sikre, at de specificerede oplysninger er korrekte, og om de har forbindelse til den specificerede virksomhed.
Sælgerens kontaktoplysninger
+358 50 53...
Vis
+358 50 5345498
+358 9 231...
Vis
+358 9 23165797
Østrig 
50 Hz
Østrig, Hörsching
50 Hz
Østrig, Hörsching
50 Hz
Østrig, Hörsching
Østrig, Hörsching
Østrig, Hörsching
Portugal, Seixal
Belgien, Hamont
Belgien, Hamont
50 Hz
Italien, Rome
Østrig, Hörsching
60 Hz
Belgien, Waregem
50 Hz
Tyskland, Bergisch-Gladbach
50 Hz
Tyskland, Bergisch-Gladbach
50 Hz
Frankrig, Villeparisis
Nederlandene, Moerdijk
Belgien, Hamont
50 Hz
Tyskland, Bergisch-Gladbach
Belgien, Hamont
Gasgenerator reservedele
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation