Howial Finger jointing line produktionslinje

Preis: Contact us for price
Finger jointing line
The plant is from 2011 and the machines have been delivered NEW by HOWIAL
The Cook Bolinder is a used
old but very robust machine. Some electrical
devices have been replaced
Item Description
01 HOWIAL - Dump unstacking SH/4t
for lifting the raw wood pile to the required working height
working height and semiautomatic separation of the wood
of the wood stack
Both battened and unbattened stacks can be separated
can be separated. With inclination possibility for tilting the stack of wood
up to 45°
Tilting and lifting of the stack by electric motor drive
drive. stack dimensions max. 1,75 x 1,75 x 6,00 m
max. stacking load 4 t
shortest lumber length 2,5 m
02 HOWIAL - lamella separation VE 1
for layer separation between tilt destacking and
and roller conveyor to the crosscut saw
With pneumatically controlled tongues
on which the material is
marked for defects and then
and then deposited on the roller conveyor below
the roller conveyor below
03 HOWIAL - Assessment roller conveyor RO-1
digital wood moisture measuring
control and recording system for the
automatic recording and control of the wood moisture in the
measuring method according to the electrical resistance principle
working
plant in large switch cabinet complete with
Ink jet printer
measuring amplifier
electrode stand
measuring electrode and measuring cable 1.5 m Control cabinet dimensions: W 600
x D 515 x H 478 mm
04 Moisture meter Gann DMT-8
digital wood moisture measuring
controlling and recording unit for the
automatic recording and control of the wood moisture in the
measuring method according to the electrical resistance principle
working
plant in large switch cabinet complete with
Ink jet printer
measuring amplifier
electrode stand
measuring electrode and measuring cable 1.5 m Control cabinet dimensions: W 600
x D 515 x H 478 mm
05 HOWIAL crosscut saw AS-30 B
pneumatic controlled under table cross cut saw
with 2
automatic feed units for transporting and
positioning of the workpieces for automatic crosscutting
Control of the saw by special photocell for the detection of
fluorescent line markings. Automatic
waste detection possible. Saw motor power 7,5 kW
saw blade diameter 700 mm
feed drive approx. 2 x 1,5 kW
air pressure 8 bar
feed speed max. approx. 60 m/min
06 HOWIAL - conveyor belt for waste transport
of the cut waste
with nubbed belt and guide plates
belt width 350 mm
belt length 2000 mm long
belt speed 0,4 m/sec
07 HOWIAL - double roller conveyor RO-2
6 m long
including cross transport and feeding of the finger jointing
Drive via round belt
all rollers driven
driven. Cross transport by chain conveyor. Ejection ±
moisture to the right Transport speed adjustable 100
m/min
length of the roller conveyor approx. 6,00 m
width of rolls approx. 400 mm
diameter of rolls 112 mm
08-11 Compact finger jointing machine make Cook Bolinder
The technical data are original from Cook Bolinder
Wood width from 75 to 245 mm
Timber thickness from 20 to 100 mm Input lengths from 1m to 6 m
Cross sections from 30 cm² to 200 cm² Pressing force from 5 to 22
to Spindle diameter 50 mm
tine profile 15/15
spindle speed approx. 6000 upm
Total electrical connected load approx. 62 kW
Machine weight approx. 9 to
Gluing OEST comb system for PU
Modern Telemechanique SPS control. In good condition with
various accessories and frequency control as new
08A Finger jointing cutter 1 set infeed / outfeed
For both shafts HSS
ZL 15/15 Leitz
cutting width 260 mm (20 pieces)
12 HOWIAL - Roller conveyor with destacking system
Driven roller conveyor with automatic ejector and
hydraulically driven destacking arms
Technical data
Length of roller conveyor approx. 12,000 mm
14 HOWIAL - Safety technology
consisting of safety fence incl. circuit breaker for the
complete finger jointing line
15 Finger joint - bending testing machine BSPLT-100
Testing machine for finger joint bending test according to DIN 1052
1/A1 and EN 385
Support distances freely adjustable according to attached dimension scale
automatic calculation of the support distances in the software
Fully automatic test procedure by mouse click
on the PC (PC not included in delivery). Alternatively the
can also be carried out by key operation on the front panel
front panel
Connection of any commercially available PC or laptop (Windows
2000/XP) via the supplied RS232 serial cable
Pressure load cell PCE-HFG Series 0...25000 N
Plus spare parts and various accessories and possibly a
instruction and help with commissioning
Find more here
vis kontakter